Pages

Followers

Tuesday, July 31, 2012

Bling It On - PTU

 This tutorial was written by Twilight on 7/31/12. Any similarities to any other tutorials is purely coincidental. 

SUPPLIES:
Tube is by VeryMany. You can get it at Scraps and The City
PTU Scrap Kit by Stu at Creative Crazy Scraps. Get it HERE

Kristin_-_TD_-_Template_183 from Toxic Desirez 
Texture of Choice: Mine is called "Texture" by jimmylovesdanielle GET IT 

-CCS_P1
-CCS_P4
-CCS_P7
-CCS_P10
-CCS_P2
-CCS_E39
-CCS_E14
-CCS_E15
-CCS_E18
-CCS_E36
-CCS_E27
-CCS_E16
-CCS_E12
-CCS_E20


Open Kristin_-_TD_-_Template_183
On the Black Top Rectangle,
Selections - Select All - Float - Defloat

Copy/ Paste "CCS_P1" as a new layer
Selections - Invert - Hit Delete
Deselect.

Repeat with Black Bottom Rectangle with same paper
Delete the original black layers
Crop your tag and add drop shadow (if you don't you'll get lines on the edge of your tag from the drop shadow!)

Copy/Paste "CCS_P4" as a new layer over the white rectangles
On the top white rectangle
Selection - Select All - Float - Defloat
Selections - Invert - Hit delete on the paper layer
Deselect

Repeat with the other white rectangle.
Crop and add drop shadow to both

Copy/Paste "CCS_P7" as a new layer over the grey rectangles
On the top grey rectangle,
Selections - Select All - Float - Defloat
On the paper, Selections - Invert - Delete
Deselect

Repeat with the bottom grey rectangle
Crop and add a small drop shadow

Copy/Paste "CCS_P10" as a new layer over the grey squares!
On the top grey square
Selections - Select All - Selections Float - Selections -Defloat
On the paper - Selections - Invert - Hit Delete
Deselect

Repeat with the bottom grey square
Crop and add drop shadow

Copy/Paste "CCS_P2" as a new layer over the Dark grey rectangles
I grew tired at this point and merged the two together
Selections - Select All - Selections - Float - Selections - Defloat
On the paper - Selections  - Invert - Hit delete
Deselect
Crop and add drop shadow

On the Circle Layer
Selections - Select All - Float - Defloat
Copy/Paste your tube/closeup as a new layer
Selections - Invert - Delete
Copy/Paste your texture as a new layer
Hit Delete
Select None

Set the Blend Mode of your texture to Screen

Copy/Paste "CCS_E39" as a new layer
Move it over the circle

Copy/Paste your tube as a new layer
Resize as needed
I mirrored mine and moved it to the left side of the tag
Add drop shadow

Copy/Paste "CCS_E14" as a new layer
Resize 50%
Image - Mirror
Place in front of the bottom part of your tube
Drop Shadow

Copy/Paste "CCS_E15" as a new layer
Resize 50% and place on the right side of the circle!

Copy/Paste "CCS_E18" as a new layer
Resize 50% twice
Place on the left of the car
Drop Shadow

Copy/Paste "CCS_E36" as a new layer
Resize 70%
Place on the right corner of the template

Copy/Paste "CCS_E27" as a new layer
Resize 70%
Move to the right
Drag it below the cupcake

Copy/Paste "CCS_E16" as a new layer
Resize 70%
Drag it to the layer above the texture
Change the blend mode to Overlay

Copy/Paste "CCS_E12" as a new layer under the circle layer
Duplicate
Move one to the top right corner
Move the other to the bottom left corner

Copy/Paste "CCS_E20" as a new layer
Resize 70%
Move to the top of the tag

Crop/Resize your tag
Add your name and copyright info.
Thank you for trying my tutorial!

 

Monday, July 30, 2012

Perfect - PTU

 This tutorial was written by Twilight on 7/30/12. Any similarities to any other tutorials is purely coincidental.   

SUPPLIES:
Tube: I'm using the art of Celinart Pinup.. You can get it HERE
ScrapKit: I'm using a PTU scrapkit called "Perfect" by Tammy. Get it HERE
Font of Choice: MTF Peach Cobbler

-Perfect Element 112
-Perfect Paper 13
-Perfect Element 113
-Perfect Paper 3
-Perfect Element 25
-Perfect Element 22
-Perfect Element 80
-Perfect Element 69
-Perfect Element 75
-Perfect Element 43
-Perfect Element 78
-Perfect Element 76
-Perfect Element 82
-Perfect Element 33


Open a new image 700 x 700

Copy/Paste "Perfect Element 112" as a new layer

Copy/Paste "Perfect Paper 13" as a new layer
On the frame - Magic Wand - Click inside the frame
Selections - Modify - Expand - 4
On the paper - Hit Delete
Copy/Paste your tube or closeup
Arrange inside the frame
Hit Delete

Copy/Paste "Perfect Element 113" as a new layer
Resize 80%
Move it to the left side of the frame

On the Film Strip
Magic Wand - Select inside each of the frames
Copy/Paste "Perfect Paper 3" as a new layer under the film strip
Selections - Invert - Hit Delete
Do not deselect

Copy/Paste your tube again, under the film strip
Arrange it to your liking
Hit delete
Change the Blend Mode to Screen
Deselect

Add a drop shadow to both the frame and filmstrip:
V&H: 0
Opacity: 100
Blur: 2
Color: Black

Copy/Paste "Perfect Element 25" as a new layer
Drag it to the bottom layer
Place so that just a small portion is showing under the frame

Copy/Paste "Perfect Element 22" as a new layer
Resize 80%
Drag below the filmstrip layers
Move it to the top so that it's showing above the filmstrip

Copy/Paste "Perfect Element 80" as a new layer
Resize 80%
Move to the top of the frame
Add a drop shadow (same as above)

Copy/Paste "Perfect Element 69" as a new layer
Resize 60%
Move to the right of the filmstrip (it should cover some of the diagonal piece of the filmstrip)
Drop Shadow

Copy/Paste "Perfect Element 75" as a new layer
Resize 50%
Move to the bottom right corner of the filmstrip
Add a drop shadow (same as above)

Copy/Paste "Perfect Element 43" as a new layer
Resize 60%
Move to the right side of the filmstrip
Drop Shadow

Copy/Paste "Perfect Element 78" as a new layer
Resize 60%
Move to the bottom Right corner of the frame
Add Drop Shadow

Copy/Paste "Perfect Element 76" as a new layer
Resize 60%
Resize 80%
Move to the left of the bag
Drop Shadow

Copy/Paste "Perfect Element 82" as a new layer
Resize 60%
Move to the bottom center of the tag
Add Drop Shadow

Copy/Paste "Perfect Element 33" as a new layer
Move to the bottom of the tag
Duplicate
Move the duplicate up to the top of the tag

Crop/Resize your tag
Add your name and copyright info
You're Done!
Thank you for trying my tutorial!











Hot Emo - PTU

This tutorial was written by Twilight on 7/30/12. Any similarities to any other tutorials is purely coincidental.   

SUPPLIES NEEDED: 
Tube(s) and/or closeup : Mine are by Elias Chatzoudis. He is currently selling at PTE, but they are closing. I believe he's going independent.
ScrapKit: "Hot Emo" by CreationbySanie. Buy it HERE
Mask of Choice: WSL Mask 12 HERE

-CbS-SpikeFrame2
-CbS-frame7
-CbS-HotEmo-p5
-CbS-HotEmo-p4
-CbS-HotEmo-vineflower2
-CbS-HotEmo-curledribbon1
-CbS-HotEmo-fog
-CbS-HotEmo-glitter1
-CbS-HotEmo-flame4
-CbS-HotEmo-skullcandle2
-CbS-HotEmo-skullycupcake2
-CbS-HotEmo-badbug1
-CbS-HotEmo-butterfly2


Open a new image 700 x 700
Copy/Paste "CbS-SpikeFrame2" as a new layer
Copy/Paste "CbS-frame7" as a new layer
Resize it by 80%

Magic Wand tool - Select inside the top frame
Selections - Modify - Expand - 4

Copy/Paste your tube/Closeup as a new layer between the frames
Selections - Invert
Hit delete on both tube layer
Deselect.

Magic Wand - Select inside the frame again
Selections - Modify - Expand - 35
Copy/Paste "CbS-HotEmo-p5" as a new layer between the tube and bottom frame
Selections - Invert
Hit delete.
Deselect.

Set the blend mode on your tube/closeup to Hard Light

Copy/Paste "CbS-HotEmo-p4" as a new layer
Layers - Load/Save Mask - Load Mask From Disc
Find WSL_Mask12
Hit Load
Merge group
Drag this to the bottom layer

Copy/Paste "CbS-HotEmo-vineflower2" as a new layer
Move it to the left side of the frame

Copy/Paste "CbS-HotEmo-curledribbon1" as a new layer
Move it to the bottom of the frame

Copy/Paste "CbS-HotEmo-fog" as a new layer
It should already be in the center of the frame
If not, move it there

Copy/Paste "CbS-HotEmo-glitter1" as a new layer
Duplicate
Move the first glitter layer to the top right of the frame
Move the second glitter layer to the bottom left of the frame
Merge the two glitter layers together and drag them down to a layer above the mask

Copy/Paste "CbS-HotEmo-flame4" as a new layer and place it on the right side of the frame

Copy/Paste "CbS-HotEmo-skullcandle2" as a new layer
Place it in front of the flame

Copy/Paste "CbS-HotEmo-skullycupcake2" as a new layer
Resize 60%
Place it to the left of the skull candle, overlapping it a little
Move a layer below the skull candle

Copy/Paste "CbS-HotEmo-badbug1" as a new layer
Resize 60%
Move it so it's just above the skull candle

Copy/Paste "CbS-HotEmo-butterfly2" as a new layer
Resize 60%
Resize 80%
Move it to the top of the frame

Copy/Paste your tube as a new layer
Resize as needed
Place it on the left side of the tag

Crop/Resize your tag
Add your copyright info and name and you're done!
Thank you for trying my tutorial!

Saturday, July 28, 2012

Emo Marie - PTU

This tutorial was written by Twilight on 7/28/12. Any similarities to any other tutorials is purely coincidental.  

Supplies:
Tube: ©Scott See. You can get it HERE
ScrapKit is called "Emo Marie" by Amy Marie. You can buy it HERE
Font of Choice: I'm using one called "Quick End Jerk". Google it :)

-frame5
-pp8
-pp014
-sofa1
-emokitty1
-rug
-cupcake3
-drink4
-drink1
-cell
-candle1
-devilbird1
-dice1
-skullylilly3
-el-amy
-sparkle1


Open a new image 700 x 700

Open/Copy/Paste "frame5" as a new layer
Magic Wand Tool
Click inside the 4 center frames (not the pink and green ones on the side)
Copy/Paste your tube as new layer
Selections - Modify - Expand - 4
Selections - Invert - Hit Delete
Copy/Paste "pp8" as a new layer under tube/closeup
Hit delete
Select None.

Magic Wand - Select inside the Pink and Green frames
Selections - Modify - Expand - 4
Copy/Paste "pp014" as a new layer
Selections - Invert - Delete

Open/Copy/Paste  "sofa1" as a new layer
Resize 80%
Move to the bottom left of your tag

Open/Copy/Paste "emokitty1" as a new layer
Resize 60% and place on the sofa


Open/Copy/Paste "rug" as a new layer
Move to the bottom layer and to the bottom of the tag so it looks like the frame and sofa are on the rug

Open/Copy/Paste "cupcake3" as a new layer
Resize 60%
Move to the right of the sofa

Open/Copy/Paste "drink4" as a new layer
Resize 60% and move to the right of the cupcake and up a little bit

Open/Copy/Paste "drink1" as a new layer
Resize 60 Percent and put to the right of the cupcake, in front of drink4

Open/Copy/Paste "cell" as a new layer
Resize 60%
Image - Free Rotate and rotate 20 degrees to the right
Move this behind the cupcake and drinks

Open/Copy/Paste "candle1" as a new layer
Resize 60% 2 times
Move this to the right by the glasses

Open/Copy/Paste "devilbird1" as a new layer
Resize 60% and place on the top left part of the frame

Open/Copy/Paste "dice1" as a new layer
Resize 80%
Put it at the top corner of the orange frame

Open/Copy/Paste "skullylilly3" as a new layer
Resize 60% and place at the top right corner of frame

Open/Copy/Paste "el-amy' as a new layer
Resize 90% and drag to the bottom layer

Copy/Paste your tube as a new layer
Resize as needed
Move to the left of the tag

Open/Copy/Paste "sparkle1" as a new layer
I left it in the middle of the tag

Crop/Resize your tag.
Add your name and copyright info.
That's it!
Thank you for trying my tutorial!

Friday, July 27, 2012

Blue Moon Magic Forum Set - FTU


This tutorial was written by Twilight on 7/27/12. Any similarities to any other tutorials is purely coincidental.   
SUPPLIES: 
TUBE: I am using the art of Freya Langford-Sidebottom. You can find it HERE 
ScrapKit: FTU Kit called "Blue Moon Magic" by  KatNKDA I dont remember where I got it. I think it was gifted. (I'm not sure whether this is FTU or not. There were no tou's in the folder)
FONT: Evanescent
PLUGINS: Eye Candy - Gradient Glow



Items Used:
-paper07
-element22
-element17
-element09
-element10
-element14
-element05
-element02


Open a new image 600 x 250
Open paper07
Copy/Paste as new layer

Copy and Paste a tube or closeup of choice.
Move it to the right side of the canvas
Set the blend mode to Hard Light

Open element22
Copy/Paste as new layer
Resize by 80% once or twice
Set the blend mode to Screen

Open element17
Copy/Paste as new layer
Resize and put it down the canvas a little

Open element09
Copy/Paste as new layer
Image - Mirror
Resize by 70%
Move it to the bottom right corner

Open element10
Copy/Paste as  new layer
Resize by 50% twice
Move it to the left

Open element05
Copy/Paste as new layer
Resize 50% Twice.
Move it to the left in front of the book

Open element14
Copy/Paste as new layer
Resize 70%
Place to  the right of the book

Open element02
Copy/Paste as new layer
Resize by 50% twice and move in front of the hat

Copy/Paste your tube as a new layer
Duplicate.
On the bottom layer,
Effects - Eye Candy 4000 - Gradient Glow:


Add a small drop shadow

Crop your tag.

New raster Layer
Flood fill with a gradient of choice using colors from your tube
Selections - Select All
Selections - Modify - Contract - 4
Hit Delete
Adjust - Add Noise - Random - 66% - Monochrome Checked
I added a small drop shadow

Add your name and Copyrights and you're done!

FOR THE AVATAR:
I hid the name and copyright layer
Edit - Copy Merged

New Image 180 x 150
Paste as new layer
I arranged it the way I liked, then added the same border as above
Add copyright and letter/name


Thank you for trying my tutorial!

Drama Queen - FTU

This tutorial was written by Twilight on 7/25/12. Any similarities to any other tutorials is purely coincidental.  

SUPPLIES NEEDED:
Tube: Mine is by VeryMany. Get it at Scraps and The City
Scrap Kit:  Leah's Part of the Glamorous Collab. Get it HERE
Mask: WH-CM Exclusice #2 by WitchysHeart. Get it HERE
Font: I used Feathergraphy Decoration HERE
FILTER: Xenofex 2 Constellation

Items used (in order of use):
-Frame4
-Frame3
-Paper3
-_halftone
-_city
-_arrow
-_kiss
_flower 2
-_sparkles
-Paper12


Open a new image 700 x 700

Copy/Paste "Frame4" as a new layer
Add a small drop shadow
Copy/Paste "Frame3" as a new layer
Magic Wand tool - Select inside the circle frame
Selections - Modify - Expand - 4

Copy/Paste "Paper3" as a new layer under Frame 3
Open your tube and copy/paste over the Paper and arrange inside the frame
Copy/Paste "_halftone" as a new layer and move inside the frame over the tube (if it isnt there already)
Set the Blend Mode on the halftone to Soft Light
On the paper layer - Selections - invert - delete
On the tube layer - hit delete
Select none

Add a drop shadow to "frame3"

Copy/Paste your tube again
Place it on the right of the frame
Add a small drop shadow

Copy/Paste "_city" as a new layer
Place at the bottom of tag so it's covering the bottom part of your tube
Effects - Xenofex 2 - Constellation with these settings:


Copy/Paste "_crown" as a new layer
Resize 80%
Move to the bottom left of the city

Copy/Paste "_arrow" as a new layer
Resize 80% and move to the bottom
I put mine behind the crown

Copy/Paste "_kiss" as a new layer under the crown
Resize 80%
I put it partially under the crown

Copy/Paste "_flower 2" as a new layer
Resize 80%
Move it to the bottom right corner of the city

Copy/Paste "_sparkles" as a new layer..
I duplicated and moved one to the top of the tag and the other to the bottom

Open "WH-CM Exclusice #2 by WitchysHeart "
Open "Paper12"
Layers - New Mask Layer - From image and find the mask.
Merge Group
Copy/Paste as new layer below the bottom frame
Duplicate and move one up and to the left
Move the other down a little to the right
Merge them together
Adjust - Add Noise - 17% - Random - Monochrome Checked

Crop and Resize
Add your name and copyrights and you're finished!
Thank you for trying my tutorial!

Thursday, July 26, 2012

Glam - FTU



This tutorial was written by Twilight on 7/26/12. Any similarities to any other tutorials is purely coincidental.  
SUPPLIES NEEDED:
2 Tubes:  Keith Garvey.. Get them at HERE (his is currently at PTE, but is going individual. Will try update this when he does!)
Amy's Portion of the FTU Glamorous Collab HERE

Items needed (in order of use):
-Mask
-DiamondScatter
-Frame6
-Paper10
-Feather1
-Gift3
-Bottle
-Lipstick
-Laptop
-Teddy Bear
-Drink
-Label 2
-Carnation
-Butterfly

Open a new image 700 x 700

Copy and Paste "Mask" as a new layer
Copy and Paste "DiamondScatter" as a new layer

Copy and Paste "Frame6" as a new layer
  Resize 80%

With you Magic Wand tool, Select inside the frame
Selections - Modify - Expand - 6
Copy and paste "Paper 10" as a new layer
Selections - Invert - Delete

Copy and paste one of your tubes as a new layer and move it under the frame
Arrange in inside the frame
Hit delete
Deselect
Set the blend mode to Lighten

Copy/Paste "Feather1" as a new layer
Move to the bottom right corner of the frame

Copy/Paste "Gift3" as a new layer
Resize 80%
Image - Mirror (or Flip Horizontal in x4)
Put this at the bottom of the frame (it should hang off a little)

Copy/Paste "Bottle" as a new layer
Move it to the bottom right. Some of it should be on top of the gifts


Copy/Paste "Lipstick" as a new layer
Move it to the right of the bottle

Copy/Paste the "Teddy Bear" as a new layer and place to the left and a little lower than the bottle

Copy/Paste "Laptop" as a new layer
Resize 80% and move in front of the lipstick, Teddy Bear and bottle

Copy/Paste "Drink" as a new layer
Image - Mirror
Move to the left corner of the frame

Copy/Paste "Label 2" as a new layer
Move it to the top left of the frame

Copy/Paste "Carnation" as a new layer
Move it to the top right corner of the frame

Copy/Paste "Butterfly" as a new layer
Resize 80%
Put it on top of the carnation.

Copy/Paste your second tube as a new layer
Resize if needed.
Place on the left side of tag.

Crop and Resize tag as needed.
Add your name and copyright info and you're done!

Wednesday, July 25, 2012

Summer Night - PTU

This tutorial was written by Twilight on 7/25/12. Any similarities to any other tutorials is purely coincidental.  
SUPPLIES NEEDED: 
Tube of Choice: I am using a new one by Lynn Rider. Buy it HERE
Scrap Kit of Choice: I am using a PTU kit called "Summer Night" by Bella's Designs. Buy it HERE
Font of Choice: Mine is called 2Peas Sunshine. It is a PTU font. Buy it HERE

Open a new image 700 x 700

Open BD_SN_Element30
Duplicate 2 times
Copy/Paste as new layer
On the bottom layer,
     Effects - DBS Flux - Blast:
         Direction - Left
         Percentage - 20
Repeat on middle layer, changing the direction to right.

On your top layer:
Magic Wand Tool - Select inside the frame
Selections - Modify - Expand - 4

Open BD_SN_Paper1
Copy/Paste as new layer
Move it under the top frame layer
Selections - Invert - Delete
Deselect

Open tube of choice
Copy/Paste as new layer
Line her up with the bottom of the frame so that it looks like her bottom half is in the frame (if you're using a full body tube, you can use the selections tool to take some of the tube off)

Open BD_SN_Element11
Copy/Paste as new layer
Image - Mirror
Resize 80% twice
Place on the left side of the frame


Open BD_SN_Element13
Copy/Paste as new layer under tube layer
Resize 80% and place it so it looks like it's hanging from the top of the frame

Open BD_SN_Element17
Copy/Paste as new layer under chair
Resize about 60%
Move to the left side of the frame

Open BD_SN_Element10
Copy/Paste as new layer
Resize about 50%
Move to the top right corner under frame and paper layer s

Open BD_SN_Element21
Copy/Paste as new layer under chair layer
Resize 60%, then again at 80%
Make is so it's peeking out behind the chair

Open BD_SN_Element27
Copy/Paste as new layer under tube
Resize 80% and set the blend mode to screen

Crop and resize your image.

Add any other elements you might want
Add your copyright info and name and you're done!



Here Kitty Kitty Forum Set - PTU


This tutorial was written by Twilight on 7/25/12. Any similarities to any other tutorials is purely coincidental.  
SUPPLIES NEEDED:
Tube of Choice: I am using one by Célinart Pinup. Get it HERE
Scrap Kit: PTU kit called "Here Kitty Kitty" by TammyKat. Get it HERE
Font:  Mine is called "Complete in Him" Get it HERE
FILTERS: Mura's Meister Copies

Let's start :)
Open a new image 600 x 250

Open tk-herekittykitty-herekittykittypaper
Copy/Paste as new Layer
Add Noise:
        Random
        7%
        Monochrome Checked
       
Open your tube
Copy/Paste as new Layer
Effects - Plugins - Mura's Meister - Copies:
          Preset - Line
          Number - 8
          Shift X - 100
          Shift Y - 0
Set the blend mode to Hard Light and lower the opacity to 57

Open tk-herekittykitty-stitches1
Copy/Paste as new layer
Place at the bottom of your canvas

Open tk-herekittykitty-clusteredcircles
Copy/Paste as new Layer
Move them down just a little

Open tk-herekittykitty-brad-print1
Copy/Paste as new layer
Move over the clustered circles to the left on your canvas

Open tk-herekittykitty-brad-meow
Copy/Paste as new layer
Place over clustered circles to the right on your canvas

Open tk-herekittykitty-kitty1
Copy/Paste as new layer
Move to the right of your tag

Open tk-herekittykitty-flower-pink
Copy/Paste as new Layer
Move to the bottom right corner (the center of the flower should still be visible)

Open tk-herekittykitty-flower-purple
Copy/Paste as new Layer
Move to the top left corner (again the center of the flower should still be visible)
Add a drop shadow to both flowers

Copy/Paste your tube as new layer
Resize if needed
Place in the center of canvas

New Raster layer
Flood fill with color or Gradient of choice
Selections - Select All
Selections - Modify - Contract - 4
Hit Delete
Deselect

Add noise, same as with the paper, but change the Noise amount to 15%

Add your copyright info and name
And you're done!

Thanks for trying my tutorial!